How the soil calculator works
The calculator finds the volume inside a rectangular bed or cylindrical planter, or beneath a layer spread over a known area. It can multiply identical beds or pots and add a settling allowance. The main result includes that allowance, but not surplus soil from rounding up to whole bags.
Choose Raised or garden bed for length, width and soil depth; Round bed or pot for inside diameter and soil depth; or Lawn or any area for area and soil depth. Measurements must be above zero. Dimension menus link metric and imperial settings, while still allowing feet and inches together. The result's menu independently offers yd³, ft³, m³ or liters.
The soil volume formulas
Use matching length units throughout. Feet give cubic feet; meters give cubic meters. Area must use the corresponding square units.
For a calculation by hand, divide inches by 12 to get feet, or centimeters by 100 to get meters. Divide cubic feet by 27 for cubic yards. Multiply cubic meters by 1,000 for liters. The calculator handles these conversions automatically.
Count is one unless More than one is enabled for beds or round containers. Extra is zero unless Add extra for settling is enabled.
More than one starts at two identical beds or pots; area mode always uses the single area entered. Settling extra starts at 10% when enabled and accepts 0%–50%. For multiple containers, the Each bed or Each one row shows the individual volume before settling extra.
Worked example: an 8 × 4 ft raised bed
The default bed is 8 ft long, 4 ft wide and filled 12 in deep. All optional switches start off, so this is one bed without settling extra, bag counts, prices or weight. The main result is 1.185 yd³, and the volume conversion row shows 32 ft³.
- Convert depth: 12 ÷ 12 = 1 ft.
- Find volume: 8 × 4 × 1 = 32 ft³.
- Convert to cubic yards: 32 ÷ 27 = 1.185 yd³, rounded to three decimals.
Enabling 10% settling extra adds 3.2 ft³, for 35.2 ft³ or 1.304 yd³. In a separate metric example, a 2.5 × 1.2 m bed filled 30 cm deep needs 0.9 m³, or 900 L, before extra.
Whole bags and bulk costs
Enable Count bags to divide the order volume by bag size and round up to whole bags. Imperial sizes are 0.75, 1, 1.5 and 2 ft³, with 1.5 ft³ selected initially. Metric sizes are 20, 40, 50 and 70 L, initially 50 L. Bags are counted for the combined order, not rounded separately for each bed.
| Bag size | Bags | They hold |
|---|---|---|
| 0.75 ft³ | 43 | 32.25 ft³ |
| 1 ft³ | 32 | 32 ft³ |
| 1.5 ft³ | 22 | 33 ft³ |
| 2 ft³ | 16 | 32 ft³ |
Order volume and bulk rate must use matching volume units. The calculator converts them automatically.
Enter an optional Price per bag for bag cost. Enable Price it in bulk for a rate per yd³, m³ or ft³ and an optional delivery fee. Delivery contributes only when a bulk price is supplied, and it is not added to bag cost. Bulk cost uses unrounded order volume; supplier minimums, purchase increments, tax and labor are not added automatically.
For the default bed, an illustrative $5 per 1.5 ft³ bag gives 22 × $5 = $110.00. An entered bulk rate of $60 per yd³ plus $40 delivery gives $111.11. Use actual quotes to compare purchases.
How the weight estimate works
Enable Estimate the weight and choose Topsoil, Bed mix, Compost or Other. Other accepts your supplier's weight per cubic yard in pounds, or per cubic meter in kilograms. Soil type changes weight only, not volume or bag count.
| Material | Imperial preset | Metric preset |
|---|---|---|
| Topsoil | 2,200 lb/yd³ | 1,300 kg/m³ |
| Bed mix | 1,600 lb/yd³ | 950 kg/m³ |
| Compost | 1,000 lb/yd³ | 600 kg/m³ |
Weight includes settling extra but excludes surplus volume from whole-bag rounding.
Oregon State's compost guide gives about 1,000 lb/yd³ for screened compost at 50% moisture; wetter compost can weigh substantially more. The presets are not product specifications. For the default bed, enabling weight with the imperial Topsoil preset gives about 1.30 tons (2,610 lb). Imperial tons are U.S. short tons of 2,000 lb; metric tonnes contain 1,000 kg.
Check measurements and depth before ordering
- 1Measure the space still needing soil. Use inside dimensions, not the outside of boards or pot walls. For an existing bed, enter the depth you need to add, not its full height. The calculator does not subtract existing soil.
- 2Choose depth for the growing conditions. Oregon State's roughly 8-inch growing-layer example includes amended native soil. Washington State recommends 15–18-inch beds where there is no suitable soil underneath and the entire root zone must be in the fill.
- 3Keep lawn topdressing thin. Clemson advises no more than 1/2 inch per application on established turf. The area mode's default 4-inch depth is a volume example, not a topdressing recommendation.
- 4Ask about settling. Washington State notes that settling and organic-matter decay reduce bed depth over time. Ask your supplier what allowance suits the material. The calculator adds a percentage to volume; it does not predict an exact final settled depth.
Frequently asked questions
How many bags of soil fill a 4 × 8 raised bed?
At 12 in deep, it needs 32 ft³: 22 bags of 1.5 ft³ or 16 bags of 2 ft³. At 6 in deep, it needs 16 ft³: 11 bags of 1.5 ft³ or eight bags of 2 ft³. These counts exclude settling extra.
How much area does a cubic yard of soil cover?
Divide 324 by depth in inches to get square feet covered. One cubic yard covers 324 ft² at 1 in, 108 ft² at 3 in or 81 ft² at 4 in, before any allowance.
Does the round option work for tapered pots?
It assumes straight sides and a constant inside diameter. The default 24-inch diameter and 18-inch depth give 4.712 ft³, rounded to three decimals, requiring four 1.5 ft³ bags without extra. Using the top diameter of a pot that narrows toward its base overestimates its volume.
How do I estimate soil for an irregular lawn?
Find its area first, then choose Lawn or any area and enter that area and the depth to add. For sections needing different depths, calculate them separately and add their volumes before ordering.
Why can estimated weight change slightly when I switch systems?
The imperial and metric density presets are independently rounded planning values, not exact conversions. Switching systems therefore changes the assumed density slightly. For a product-specific estimate, choose Other and enter the supplier's density in the active system.
Sources
- 1NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically · National Institute of Standards and Technology · Accessed November 2026
- 2Raised bed gardening · Oregon State University Extension Service · Accessed November 2026
- 3Raised Beds: Deciding If They Benefit Your Vegetable Garden · Washington State University Extension · Accessed November 2026
- 4Topdressing A Home Lawn · Clemson University Cooperative Extension · Accessed November 2026
- 5Bulk Density is an Indicator of Soil Health · South Dakota State University Extension · Accessed November 2026
- 6Interpreting compost analyses · Oregon State University Extension Service · Accessed November 2026
Estimates only; confirm soil weight with your supplier and safe transport with a qualified hauler.