How the conversion calculator works
A unit conversion expresses the same quantity in a different unit. This calculator covers 16 measurement types, including everyday measurements and technical units. The weight category converts mass, such as pounds to kilograms; force has its own category.
- 1Choose a measurement type. Select a category, then choose the starting and target units. Unit lists distinguish metric, US customary and Imperial (UK) measures where needed.
- 2Enter the value. Type in either value box to update the other. You can also enter a complete request in search, such as 5 ft to cm or 100 F in C.
- 3Check the result. Read the conversion steps and the Exact or Rounded label. Adjust the displayed precision, use a quick pick, or select another unit from the results list.
- 4Reverse the conversion. Use the swap button to exchange the two units. Check the unit labels before copying the answer.
The standard conversion formula
Most conversions multiply by a fixed factor. A shared reference unit connects the starting and target units: first convert into that reference unit, then divide by the target unit's factor.
Each factor expresses one unit in the same reference unit. For feet to centimeters, the factors are 0.3048 meters per foot and 0.01 meters per centimeter.
Area conversions square the corresponding length factor, and volume conversions cube it. Because 1 ft equals 0.3048 m, 1 ft² equals 0.3048² = 0.09290304 m². Temperature and fuel economy need different formulas, explained below.
Worked example: 5 feet to centimeters
Enter 5, choose feet as the starting unit and centimeters as the target. Multiply 5 × 0.3048 to get 1.524 m, then divide by 0.01 to get 152.4 cm. Both factors are exact definitions, and the displayed answer needs no rounding.
Common unit conversions
| Category | Starting value | Converted value |
|---|---|---|
| Length | 1 in | 2.54 cm |
| Weight (mass) | 1 lb | 0.45359237 kg |
| Volume | 1 US gal | 3.785411784 L |
| Temperature | 20 °C | 68 °F |
| Area | 1 ft² | 0.09290304 m² |
| Speed | 60 mph | 96.56064 km/h |
| Time | 1 h | 3,600 s |
| Pressure | 1 bar | 100 kPa |
| Energy | 1 kWh | 3.6 MJ |
| Power | 1 kW | 1,000 W |
| Data | 1 GiB | 1,073,741,824 B |
| Data rate | 100 Mbit/s | 12.5 MB/s |
| Fuel economy | 30 mpg (US) | Approximately 7.84 L/100 km |
| Angle | 180° | Approximately 3.14159265 rad |
| Force | 1 kgf | 9.80665 N |
| Frequency | 60 rpm | 1 Hz |
Exact answers and rounded results
Exact means the displayed answer needs no rounding under the unit definitions used. An exact factor can still produce a repeating decimal: 10 cm ÷ 2.54 is approximately 3.93701 in. More displayed digits do not make the original measurement more precise.
A Rounded label can also reflect an approximate conversion factor. The calculator uses NIST's rounded values of 133.3224 Pa for conventional mmHg, 3,386.389 Pa for conventional inHg and 735.4988 W for metric horsepower. Rounded tabular factors do not necessarily mean the underlying unit lacks an exact definition.
Named variants also matter. Here, cal means the thermochemical calorie, exactly 4.184 J; BTU means the International Table BTU, exactly 1,055.05585262 J. Mechanical horsepower is 550 ft·lbf/s and differs from metric horsepower.
Temperature conversions
Temperature scales have different zero points, so their conversions include offsets. Use these equations for a temperature reading:
The constants in these equations are exact.
For example, 100 °F becomes approximately 37.78 °C. Rankine equals kelvin multiplied by 1.8. Negative Celsius and Fahrenheit readings are valid, but temperature differences need no zero-point offset: a rise of 10 °C equals a rise of 18 °F.
US, UK and nutrition-label volumes
Check which measurement system a recipe or label uses. A US gallon is exactly 3.785411784 L; an Imperial gallon is exactly 4.54609 L, about 20% larger. Their pints and fluid ounces differ too.
| Measure | Volume |
|---|---|
| US customary cup | 236.5882365 mL |
| US liquid pint | 473.176473 mL |
| Imperial pint | 568.26125 mL |
| FDA nutrition-label cup | 240 mL |
For nutrition labeling, FDA also defines a teaspoon as 5 mL, a tablespoon as 15 mL and a fluid ounce as 30 mL. These labeling definitions do not replace US customary volumes in other contexts.
Data storage and data rates
Decimal prefixes use powers of 1,000: 1 GB is 1,000,000,000 bytes. Binary prefixes use powers of 1,024: 1 KiB is 1,024 bytes, and 1 GiB is 1,073,741,824 bytes. Thus 1 TB equals approximately 931.32 GiB; the byte count has not changed.
A byte contains 8 bits. Divide a rate in bits per second by 8 to express it in bytes per second, keeping the same decimal prefix: 100 Mbit/s equals 12.5 MB/s. This converts the stated rate; it does not predict an actual download speed.
Fuel economy conversions
Miles per gallon measures distance per fuel volume. Liters per 100 kilometers measures fuel volume per distance, so the relationship is reciprocal: higher mpg means lower L/100 km.
Constants are shown rounded. Derive the full constants as 100 × liters per gallon ÷ 1.609344, using the appropriate gallon definition.
For US gallons, 30 mpg becomes 7.84 L/100 km, while 5 L/100 km becomes 47.04 mpg. Use positive values for this reciprocal conversion and choose the correct gallon before comparing figures.
Frequently asked questions
How many pounds are in a kilogram?
One kilogram is approximately 2.20462 pounds. The reverse definition is exact: one avoirdupois pound equals 0.45359237 kg.
Can I convert cups directly to grams?
Not without the ingredient's density or a measured weight per cup. Cups measure volume and grams measure mass, so this unit converter cannot supply a universal conversion between them.
How many milliliters are in an ounce?
A US fluid ounce is approximately 29.57 mL; an Imperial fluid ounce is approximately 28.41 mL. An ounce without 'fluid' usually denotes mass and cannot be converted to milliliters without more information.
Does the calculator use the US survey foot?
Ordinary feet use the international definition, exactly 0.3048 m, and an acre based on it equals 4,046.8564224 m². The US survey foot was retired for new applications on January 1, 2023, but historical and legacy records may retain it; do not silently reinterpret those records.
Can I enter fractions and scientific notation?
Yes, entries such as 3/4, 1 1/2 and 2.5e6 are supported. The last example means 2.5 × 106, or 2,500,000.
Sources
- 1NIST Guide to the SI, Appendix B: Conversion Factors · National Institute of Standards and Technology · Accessed November 2026
- 2NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically · National Institute of Standards and Technology · Accessed November 2026
- 3NIST Guide to the SI, Footnotes · National Institute of Standards and Technology · Accessed November 2026
- 4NIST Handbook 44 (2026), Appendix C: General Tables of Units of Measurement · National Institute of Standards and Technology · Accessed November 2026
- 521 CFR 101.9: Nutrition labeling of food · U.S. Food and Drug Administration · Accessed November 2026
- 6Prefixes for binary multiples · National Institute of Standards and Technology · Accessed November 2026