How the circle calculator works
A circle's radius is the distance from its center to its edge. Its diameter crosses the center from edge to edge and is twice the radius. Circumference is the distance around the edge. Area measures the flat region inside the circle.
Enter a positive number in Radius r, Diameter d, Circumference C or Area A. The solver uses that single value to determine the other measurements. The main result is area when you enter a radius, diameter or circumference; it switches to radius when you enter an area. The note under the answer identifies the value used, and the circle diagram shows the measurements with the working below it.
Circle formulas
Diameter and circumference use the same length unit as the radius. Area uses the corresponding square unit.
The calculator works through the radius. When you start with diameter, circumference or area, it first rearranges the appropriate relationship:
Use the equation matching your known measurement. Take the positive square root when finding radius from area.
For example, a diameter of 12 cm gives r = 12 ÷ 2 = 6 cm, then A = π × 6² = 36π ≈ 113.0973 cm². If you start with circumference instead, divide it by 2π, not π, to get the radius. Dividing circumference by π gives the diameter.
Worked example with the default radius
The calculator starts with a radius of 5 and cm selected. Squaring the radius gives 25, so the area is 25π ≈ 78.5398 cm². The diameter is 2 × 5 = 10 cm, and the circumference is 10π ≈ 31.4159 cm.
The measurement boxes display Diameter d as 10, Circumference C as 31.416 and Area A as 78.54. These are rounded displays of the same calculations; the main answer and detailed result rows below show additional precision.
The converted areas use the underlying calculation, not the displayed 78.5398. The same applies to later steps in the working: rounding a displayed intermediate value does not replace the value used internally.
Exact π forms and decimal answers
When you enter a radius or diameter, the calculator can show circumference and area in terms of π. These extra forms appear when both 2r and r² pass its four-decimal-place precision check. Starting with circumference or area does not display these exact-π rows.
An expression such as 25π preserves the exact result for the supplied radius, while its finite decimal is an approximation. The working uses ≈ when a value differs from its rounded display beyond the calculator's numerical tolerance. Detailed result text and worked steps use 4–10 decimal places of rounding precision, with more places for small numbers; converted areas use 2–10. Unnecessary trailing zeros may be omitted.
Units and area conversions
Radius, diameter and circumference are lengths; area uses square units. Area conversion factors are the squares of length conversion factors: 1 in = 2.54 cm, so 1 in² = 6.4516 cm². The two converted units depend on your selection:
| Selected unit | Area unit | In other units |
|---|---|---|
| mm | mm² | cm² and in² |
| cm | cm² | m² and in² |
| m | m² | cm² and ft² |
| km | km² | ha and mi² |
| in | in² | ft² and cm² |
| ft | ft² | m² and yd² |
| yd | yd² | ft² and m² |
| mi | mi² | acres and km² |
Tips for measuring a circle
- 1Measure through the center. For a physical circular object, measure diameter from one edge to the opposite edge through the center. A shorter, off-center chord is not the diameter.
- 2Use circumference for the boundary. Circumference tells you the length around a full circle, such as the distance needed for edging. Area tells you how much flat surface the circle covers, so use it for a surface measurement.
- 3Keep the original measurement precision. Enter your measurement without first rounding it more than necessary. A result calculated from an approximate measurement remains approximate, even if an exact π form appears.
Circle calculator FAQ
Can I find a circle's radius from its area?
Yes. Enter the area as a positive number in square units, and the main result switches to radius using r = √(A ÷ π). For example, 100 cm² gives a radius of about 5.6419 cm; the solver also works out diameter and circumference.
How do I find a circle's area from circumference?
Enter the distance around the circle in Circumference C. The solver uses r = C ÷ (2π), then A = πr², which is equivalent to A = C² ÷ (4π). A circumference of 20 cm gives an area of about 31.831 cm².
Why does doubling the radius make the area four times larger?
Radius is squared in A = πr², so replacing r with 2r multiplies area by 2² = 4. Diameter and circumference only double because they depend linearly on radius.
Can I enter zero or a negative number?
No. The calculator requires the measurement you enter to be greater than zero, whether it is a length or an area. Positive decimals are allowed.
Does this calculator work for ovals, semicircles or rings?
No. It solves a complete circle from one measurement. Ovals, semicircles and rings need different formulas, which are not included here.
Sources
- 19.5 Solve Geometry Applications: Circles and Irregular Figures · OpenStax, Rice University · Accessed November 2026
- 25.3 Decimals and Fractions · OpenStax, Rice University · Accessed November 2026
- 3NIST Handbook 44, 2026: Appendix C. General Tables of Units of Measurement · National Institute of Standards and Technology · Accessed November 2026