How the proportion calculator works
A proportion states that two ratios are equal. In a/b = c/d, the first ratio compares a with b, and the second compares c with d. The numbers can be different while expressing the same relationship, as in 3/4 = 9/12.
Enter three known numbers in the four positions a, b, c and d, and leave the value you want to find blank. You can solve for either numerator or either denominator. The main result identifies the missing term and gives its value.
The working shows the cross-multiplication equation, the division needed to isolate the missing term and the completed proportion. Substituting the answer back into the original ratios provides a check that the solution fits.
The cross-multiplication formula
The original denominators b and d must both be nonzero.
Cross-multiplication follows from multiplying both sides by b × d. The denominators cancel, leaving a × d = b × c. Once three terms are known, divide by the number multiplying the unknown.
Use the equation for the missing term. Each divisor must be nonzero, and the solution must keep the original denominators b and d nonzero.
Worked example: find the missing denominator
Using a = 3, b = 4 and c = 9, leave d blank. The question is: 3 is to 4 as 9 is to what number? Multiply diagonally, then divide by 3 to find d.
Both cross products equal 36, so the answer checks. You can also see the solution by scaling: 3 becomes 9 when multiplied by 3, so 4 must become 12. Both fractions have the decimal value 0.75.
Solving for any of the four positions
| Missing term | Proportion | Calculation | Answer |
|---|---|---|---|
| a | x/4 = 9/12 | 4 × 9 ÷ 12 | 3 |
| b | 3/x = 9/12 | 3 × 12 ÷ 9 | 4 |
| c | 3/4 = x/12 | 3 × 12 ÷ 4 | 9 |
| d | 3/4 = 9/x | 4 × 9 ÷ 3 | 12 |
The position changes which numbers you multiply and divide, but the cross-product equation stays the same. In the calculator, leave the unknown field empty instead of entering the letter x.
Setting up a practical proportion
Suppose a recipe uses 180 g of flour for 6 portions, and you want 10 portions. Keep flour above portions in both ratios: 180/6 = c/10. Enter a = 180, b = 6 and d = 10, leaving c blank.
The missing amount is 180 × 10 ÷ 6 = 300 g. This assumes the flour amount scales directly with the number of portions. The calculator performs the arithmetic; you decide whether proportional scaling is appropriate for the situation.
- 1Keep the comparison order the same. If the first ratio is flour divided by portions, the second must also be flour divided by portions. Reversing just one ratio changes the equation.
- 2Match corresponding units. Use the same unit for a and c, and the same unit for b and d. The numerator and denominator may describe different quantities, such as grams and portions. Convert units before entering the numbers.
- 3Check the direction of the answer. For positive quantities in direct proportion, a larger number of portions requires more flour. If your result moves in the opposite direction, check the placement of your values.
Proportion calculator FAQ
What is the difference between a ratio and a proportion?
A ratio compares quantities, such as 3:4 or 3/4. A proportion states that two ratios are equal, such as 3:4 = 9:12. Solving a proportion means finding a missing term that makes that equality true.
Can I use decimals, fractions or negative numbers?
The same algebra works with decimals and negative numbers. Enter fractional quantities as decimals where possible, such as 0.5 for 1/2. For example, -2/5 = c/15 gives c = -6, although negative quantities may not make sense in a particular practical problem.
How do I solve a percentage using a proportion?
Write part/whole = percent/100. To find what percent 18 is of 60, enter 18/60 = c/100. The missing numerator is 18 × 100 ÷ 60 = 30, so the answer is 30%.
Why might there be no single answer?
Consider 0/5 = 0/d: every nonzero value of d works, so the missing denominator is not uniquely determined. By contrast, 0/5 = 2/d has no solution because 2 divided by a finite nonzero number cannot equal zero. These conclusions follow directly from the original fractions, without dividing by zero.
Can this calculator solve inverse-proportion problems?
An inverse-proportion problem needs a different setup because the product of the two quantities stays constant. Write the equal products first, then rearrange them into an equality of ratios. The calculator does not determine whether a real-world relationship is direct or inverse.
Why does checking a rounded answer give a small difference?
A rounded decimal may only approximately satisfy the original proportion. For example, 1/3 = c/1 has the exact solution c = 1/3, while 0.3333 is an approximation. Keep intermediate values unrounded and round only the final answer when possible.
Sources
- 16.5 Solve Proportions and their Applications · OpenStax, Rice University · Accessed November 2026
- 25.3: Proportion · TRU Open Press, Thompson Rivers University · Accessed November 2026
- 38.1 Simplify Rational Expressions · OpenStax, Rice University · Accessed November 2026
- 4Rates and ratios · Australian Mathematical Sciences Institute · Accessed November 2026
- 5Proportion · Australian Mathematical Sciences Institute · Accessed November 2026