How the one rep max calculator works
Your one rep max, or 1RM, is the heaviest load you can lift once with proper technique. A multiple-repetition maximum test estimates it from a lighter load lifted for several repetitions.
Enter the weight and completed reps from one demanding set, in kilograms or pounds. The calculator defaults to the arithmetic mean of nine formulas and shows their lowest and highest estimates. You can select an individual formula instead; the lift selection changes the label, not the equation.
Results also include percentage-based training weights and predicted maximum loads for 1 to 12 reps. Choose a rounding increment of 0.5, 1, 2.5 or 5 kg, or 1, 2.5, 5 or 10 lb. This rounds the training and rep max tables, not the underlying 1RM estimate or formula range.
The nine prediction formulas
For sets of more than one rep. With one rep entered, the calculator returns the entered load without applying a prediction multiplier.
| Formula | Multiplier f(r) |
|---|---|
| Epley | 1 + 0.0333 × r |
| Brzycki | 1 ÷ (1.0278 − 0.0278 × r) |
| Lombardi | r0.1 |
| Mayhew | 1 ÷ (0.522 + 0.419 × e−0.055r) |
| O'Connor | 1 + 0.025 × r |
| Wathen | 1 ÷ (0.488 + 0.538 × e−0.075r) |
| Lander | 1 ÷ (1.013 − 0.0267123 × r) |
| Adams | 1 ÷ (1 − 0.02 × r) |
| Brown | 0.0328 × r + 0.9849 |
The coefficients follow the equations tabulated by Ribeiro and colleagues. Their table calls the 0.0333 equation Welday; the Canadian Strength and Conditioning Association lists the same expression as Epley. It is counted once here.
Average adds the nine unrounded estimates and divides by nine. The displayed range is the smallest to largest formula result, not a confidence interval: your measured maximum could fall outside it.
No formula is best for every exercise and population. Ribeiro's 2024 study tested 119 young adults before and after 16 weeks of training and found that accuracy varied by lift and sex. It did not establish that averaging the equations was more accurate.
Worked example: 100 kg for 5 reps
The default example uses 100 kg for 5 reps, Average selected, and 2.5 kg rounding. Epley's calculation is 100 × (1 + 0.0333 × 5) = 116.65 kg, displayed as 116.7 kg. The mean of all nine unrounded estimates is 114.9 kg.
Adams gives the lowest estimate, 111.1 kg, and Mayhew the highest, 119.0 kg. For comparison, entering the same weight for 10 reps gives the following results.
| Reps | Average 1RM | Formula range |
|---|---|---|
| 5Default | 114.9 kg | 111.1–119.0 kg |
| 10 | 130.4 kg | 125.0–134.7 kg |
Training weights and rounding
The training load has the same unit as the estimated 1RM. Calculations use the full-precision estimate before rounding.
For the default example, 85% is 97.7 kg before plate rounding, or 97.5 kg to the nearest 2.5 kg. The increment applies to the total load, not to each side of a barbell.
| Percentage | Before plate rounding | Rounded load |
|---|---|---|
| 60% | 69.0 kg | 70 kg |
| 70% | 80.5 kg | 80 kg |
| 75% | 86.2 kg | 85 kg |
| 80% | 91.9 kg | 92.5 kg |
| 85% | 97.7 kg | 97.5 kg |
| 90% | 103.4 kg | 102.5 kg |
How the rep max table is calculated
The rep max table reverses the selected prediction formula. In Average mode, it divides by the mean of the nine multipliers at the target rep count. It does not average nine separately reversed estimates.
The one-rep row uses M directly. Predicted loads are then rounded to the chosen increment.
In the default example, reversing the average multiplier returns 100 kg for 5 reps. The predicted 10-rep load is 88.1 kg before plate rounding, or 87.5 kg with a 2.5 kg increment.
Get a more useful estimate
Prefer a lower-repetition set when it suits your experience and exercise. In a study of 70 adults performing bench press and leg press tests, Reynolds and colleagues obtained better predictions from 5-rep maximum tests than from 10- or 20-rep tests. This does not establish the same accuracy for every lift.
- 1Enter one set, not the whole workout. Use the weight and completed reps from one uninterrupted set. Five sets of five means entering 5 reps, not 25.
- 2Keep load records consistent. For a barbell lift, include the bar and plates. For dumbbells, use a consistent per-dumbbell load so the result remains a per-dumbbell estimate.
- 3Record effort and technique. The equations assume repetitions taken to a maximum effort. Stopping with several reps left can underestimate your capacity; this calculator has no reps-in-reserve adjustment. Count only completed reps with proper technique.
Frequently asked questions
How do I calculate my one rep max manually?
Using Epley, multiply the lifted weight by (1 + 0.0333 × reps). For 100 kg and 5 reps, that gives 116.7 kg; the calculator's Average setting instead gives 114.9 kg.
What is my estimated max if I bench 225 lb for 5 reps?
The average of the nine formulas is 258.6 lb. Individual estimates range from 250.0 lb with Adams to 267.8 lb with Mayhew, before plate rounding.
Does entering one rep mean that weight is my true max?
The calculator returns the entered weight without a prediction increase. It is your measured 1RM only if that was genuinely your heaviest successful single with proper technique.
What percentage of my 1RM is a 5-rep max?
The NSCA training load chart uses about 87%, as explained by the Human Performance Resource Center. This calculator's rep max table reverses the selected formula instead of using a fixed percentage chart, so its percentages can differ.
Why does changing the rounding increment leave my estimated 1RM unchanged?
Rounding changes the practical loads in the training and rep max tables. The main estimate and formula range remain mathematical predictions displayed to one decimal place.
Can I use kilograms or pounds?
Yes, the formulas work in either unit when the input and output use the same unit. One pound is exactly 0.45359237 kg, so 100 kg is about 220.5 lb.
Sources
- 1Accuracy of 1RM Prediction Equations Before and After Resistance Training in Three Different Lifts · International Universities Strength and Conditioning Association · Accessed November 2026
- 2Selecting Appropriate Training Load · Canadian Strength and Conditioning Association · Accessed November 2026
- 3Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry · National Library of Medicine, PubMed · Accessed November 2026
- 4What is a one-rep max? · Uniformed Services University, Human Performance Resources by CHAMP · Accessed November 2026
- 5NIST Handbook 133, 2026: Appendix E, General Tables of Units of Measurement · National Institute of Standards and Technology · Accessed November 2026
Results are estimates; seek a qualified coach's guidance before maximal testing and medical advice if an injury or health condition affects lifting.