How the pace calculator works
Running pace is the time you take to cover one mile or kilometer. A smaller pace number means a faster speed: 8:00 per mile is faster than 9:00 per mile. The calculator finds your average pace, the time needed for a distance, or the distance covered in a given time.
- 1Choose what to find. Find pace uses distance and time. Find time uses distance and pace. Find distance uses time and pace.
- 2Enter the known values. Enter distance in miles, kilometers or meters, or choose a race preset. Enter duration in hours, minutes and seconds. Use positive values for distance, time and pace.
- 3Check the pace or speed units. Enter pace in minutes and seconds per mile or kilometer, or use speed in mph or km/h. A pace of 5:30 means 5 minutes 30 seconds, which is 5.5 decimal minutes.
Results include pace in both units, speed and a 400 m lap time. Even splits show individual segments and cumulative times. Race comparisons separate the finish time at your current pace from a prediction that allows average speed to decrease over a longer distance.
The pace, time and distance formulas
For miles, substitute distance in miles and pace in seconds per mile. Keep the distance unit consistent throughout.
Convert duration to seconds before dividing: multiply hours by 3,600 and minutes by 60, then add the seconds. Convert the answer back to minutes and seconds for display. For example, a 30-minute run at 6:00 per kilometer covers 1,800 ÷ 360 = 5 km.
Worked example: a four-hour marathon
Choose Find pace, select Marathon and enter 4:00:00. Four hours is 14,400 seconds. Dividing by 42.195 km gives 341.27 seconds per kilometer, displayed as 5:41 per km. The equivalent pace is 549.23 seconds per mile, displayed as 9:09 per mile.
The same result is 10.55 km/h or 6.55 mph, with a 400 m lap time of 2:17. Pace and time displays round to the nearest second, but subsequent calculations use unrounded values. Re-entering a rounded pace can therefore produce a slightly different finish time.
Convert between pace and speed
For mph, divide 60 by pace in decimal minutes per mile. One international mile is exactly 1.609344 km.
To convert pace per kilometer back to pace per mile, multiply by 1.609344. Convert minutes and seconds to seconds before applying the factor, then format the result again. Do not treat 8:30 as 8.30 minutes.
| Pace per mile | Pace per km | mph | km/h |
|---|---|---|---|
| 6:00 | 3:44 | 10.0 | 16.1 |
| 7:00 | 4:21 | 8.6 | 13.8 |
| 8:00 | 4:58 | 7.5 | 12.1 |
| 9:00 | 5:36 | 6.7 | 10.7 |
| 10:00 | 6:13 | 6.0 | 9.7 |
| 12:00 | 7:27 | 5.0 | 8.0 |
Race distances
| Race | Kilometers | Miles |
|---|---|---|
| Mile | 1.609344 | 1 |
| 5K | 5 | 3.107 |
| 10K | 10 | 6.214 |
| Half marathon | 21.0975 | 13.109 |
| Marathon | 42.195 | 26.219 |
A half marathon is exactly half the marathon distance. The familiar labels 13.1 miles and 26.2 miles are rounded, so use the race presets when checking a finish-time goal.
How even splits are calculated
Each split time is pace multiplied by that segment's distance. Cumulative time is pace multiplied by the total distance reached. A final partial mile or kilometer gets a proportionally shorter split, so the table ends at the full race distance.
At the four-hour marathon pace, the cumulative 10 km time is 56:53 and halfway is 2:00:00. The final 195 m takes about 1:07. A 400 m lap uses pace in seconds per kilometer × 0.4. Rounded segment times may not add up exactly to the rounded finish time.
Predicting another race time
A same-pace finish time assumes you maintain the current pace over the new distance. The race prediction instead uses the Riegel power formula with a fixed exponent of 1.06. For a longer target race, it predicts a slower average pace.
Use the same distance unit for both races. The predicted time has the same time unit as the starting time.
For a 25:00 5K, the marathon prediction is 1,500 × (42.195 ÷ 5)1.06 = 14,386.65 seconds, or 3:59:47. Use a recent race result as the starting performance. An easy training run does not measure your race capability.
| Target race | At the same pace | Riegel prediction |
|---|---|---|
| 10K | 50:00 | 52:07 |
| Half marathon | 1:45:29 | 1:55:00 |
| Marathon | 3:30:59 | 3:59:47 |
Check your inputs before setting a goal
- 1Choose the right duration. Use elapsed time, including stops, when those stops count toward your finish-time goal.
- 2Keep the distance basis consistent. Use a race preset for the official distance, or a custom distance to analyze your recorded run.
- 3Use cumulative times. Check the split table against your goal instead of multiplying a rounded pace display.
Frequently asked questions
How do I calculate my running pace?
Convert your time to seconds and divide by distance. A 25-minute 5K is 1,500 ÷ 5 = 300 seconds per kilometer, or 5:00 per km and about 8:03 per mile.
What pace do I need for a two-hour half marathon?
The exact average is about 5:41.27 per kilometer or 9:09.23 per mile. Rounded to whole seconds, 5:41 per km and 9:09 per mile are both slightly faster than the exact two-hour pace.
How do I convert pace to treadmill speed?
Divide 60 by pace in decimal minutes. A pace of 5:30 per kilometer is 5.5 minutes, so the speed is 60 ÷ 5.5 = 10.9 km/h. Using minutes per mile gives mph.
Can I average the paces from several runs?
Add their times and divide by their combined distance. Taking a simple average of the displayed paces gives the correct combined pace only when the distances are equal.
Why does my watch show a different pace?
Check that both calculations use the same distance and duration. Moving time instead of elapsed time, or recorded distance instead of the race distance, changes the result even when the formula is identical.
Is a same-pace finish time a race prediction?
No. A same-pace time multiplies your current pace by the target distance. The Riegel prediction adjusts average pace using the distance ratio and the fixed exponent of 1.06.
Sources
- 1NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically · National Institute of Standards and Technology · Accessed November 2026
- 2University Physics Volume 1, Chapter 3: Key equations · OpenStax, Rice University · Accessed November 2026
- 3The measurement of road race courses (2023) · World Athletics and Association of International Marathons and Distance Races · Accessed November 2026
- 4An empirical study of race times in recreational endurance runners · BMC, Springer Nature · Accessed November 2026