How the time card calculator works
The calculator adds the time between each day's In and Out punches, subtracts unpaid breaks and totals the workweek. Results show hours and minutes, decimal hours and the split between regular, overtime and any double-time hours. An optional hourly rate adds an estimated gross pay total.
- 1Choose one or two weeks. Use one week for a weekly time card or two consecutive weeks for a biweekly card. Each seven-day block should match your employer's workweek.
- 2Enter your work times. Fill in In and Out for each shift and leave days off blank. Use explicit AM and PM or 24-hour times, such as 08:00 and 17:00.
- 3Enter unpaid breaks. Choose a break duration in minutes or enter Lunch out and Lunch in punches. Do not subtract paid rest breaks or deduct the same lunch twice.
- 4Choose overtime and pay settings. Select weekly over 40 hours, daily and weekly, California, or none. Enter an hourly rate if you want a pay estimate, and leave punch rounding off unless you need it.
Time card formulas
Calculate in minutes first so that clock notation does not get confused with decimal hours. Elapsed time is Out minus In, adjusted for an overnight shift when necessary.
Add the daily work minutes to get weekly and pay-period totals.
In Lunch out/in mode, the unpaid break is Lunch in minus Lunch out, with the punches placed in chronological order across midnight if needed. Check that lunch falls within the shift and that the break does not exceed the elapsed time.
These equations apply to one workweek in weekly-over-40 mode. Daily overtime and double time require separate classification.
Use decimal hours. Each worked hour belongs to one pay category only.
This pay formula assumes the entered rate is the correct regular rate for overtime. Bonuses, commissions, shift differentials or multiple hourly rates can change that legal rate and require a separate calculation.
Worked weekly example
Use five shifts from 8:00 AM to 5:00 PM, each with a 30-minute unpaid lunch. Set the hourly rate to $20, choose weekly overtime after 40 hours and turn rounding off.
Each shift spans 9 hours. Subtracting 0.50 hours for lunch leaves 8.50 hours worked. Five shifts total 42 hours 30 minutes, or 42.50 hours: 40 regular hours and 2.50 overtime hours.
Regular pay is 40 × $20 = $800. Overtime pay is 2.50 × $30 = $75, giving $875.00 in gross pay. There are no double-time hours under the weekly-only rule.
Minutes versus decimal hours
Divide minutes by 60 before adding them to whole hours. For example, 7 hours 45 minutes is 7 + 45 ÷ 60 = 7.75 hours, not 7.45. Carry exact minute totals through the calculation and round decimal hours only for display.
| Minutes | Decimal hours |
|---|---|
| 5 | 0.08 |
| 6 | 0.10 |
| 10 | 0.17 |
| 15 | 0.25 |
| 20 | 0.33 |
| 30 | 0.50 |
| 45 | 0.75 |
| 60 | 1.00 |
Which breaks should you subtract?
Under general federal rules, short rest breaks of about 5–20 minutes count as hours worked. A bona fide meal period, ordinarily 30 minutes or more, generally can be excluded when you are completely relieved from duty. Answering work calls while eating can make that time compensable. Enter only breaks that qualify as unpaid; state rules may add protections.
Overnight shifts and clock changes
When Out is earlier than In, add 24 hours to Out before subtracting. A shift from 10:00 PM to 6:30 AM spans 8 hours 30 minutes. After a 30-minute unpaid break, it contains 8 hours of work.
The overnight shortcut measures a shift's length. If it crosses your employer's fixed workday or workweek boundary, payroll may need its hours split at that boundary for overtime. Time-only entries also cannot establish actual elapsed time across daylight-saving changes or distinguish a full 24-hour shift from zero hours.
Rounding time clock punches
Punch rounding uses the nearest selected interval: 5 minutes, 6 minutes (one-tenth of an hour), or 15 minutes. Round the punches before calculating durations; a break entered as minutes remains a duration. Do not round both the punches and the resulting daily total.
For whole-minute quarter-hour rounding, 1–7 minutes after a quarter-hour mark round down and 8–14 round up. Punches at 7:53 AM, 12:04 PM, 12:36 PM and 4:08 PM become 8:00 AM, noon, 12:30 PM and 4:15 PM. That gives 7 hours 45 minutes worked; the exact punches give 7 hours 43 minutes.
Federal rounding rules require proper compensation for all time actually worked over time. A rounding setting does not establish that a policy is lawful. State rules can be stricter: California prohibits rounding meal-period punches, so keep rounding off for those records.
Weekly, daily and California overtime
Under the FLSA's general rule, covered, nonexempt employees receive at least 1.5 times their regular rate after 40 hours worked in a fixed, recurring 168-hour workweek. The workweek can start on any day and at any hour.
| Setting | How hours are classified |
|---|---|
| Weekly over 40 | Hours above 40 in each workweek are overtime. No daily overtime or double time. |
| Daily and weekly | Hours above 8 in a workday are overtime. Apply the weekly 40-hour limit to hours still classified as regular, without counting an hour twice. |
| California | Generally, daily hours above 8 through 12 earn 1.5 times the rate; hours above 12 earn double time. On the seventh consecutive day worked within the workweek, the first 8 hours earn 1.5 times and later hours earn double time. Apply weekly overtime without duplicating daily premiums. |
| None | All entered work hours are classified as regular. This setting does not determine whether an employee is legally exempt. |
California's summary describes its general rules, not alternative workweek arrangements or industry exceptions. Match the setting to the rules that apply to your job.
For a biweekly card, calculate overtime separately for each workweek. A 30-hour week followed by a 50-hour week contains 70 regular hours and 10 overtime hours, even though the average is 40. At $20 per hour, gross pay is 70 × $20 + 10 × $30 = $1,700.
Checks before submitting your time card
- 1Check every punch. Confirm AM and PM, missing entries and overnight shifts against your original records.
- 2Check break deductions. Make sure you have not subtracted paid breaks or a lunch you worked through.
- 3Check the weekly split. Compare each workweek separately, including any shift that crosses the boundary, before comparing gross pay with your payslip.
Frequently asked questions
Is 7.30 hours the same as 7 hours 30 minutes?
No. Decimal 7.30 hours is 7 hours 18 minutes, because 0.30 × 60 = 18. Seven hours 30 minutes is 7.50 decimal hours.
Does the calculator automatically deduct lunch?
Lunch is deducted from the break duration or lunch punches you enter. Use zero unpaid minutes when no unpaid break was taken, and do not enter the same break in both formats.
Does 80 hours on a biweekly time card mean no overtime?
Not necessarily. Under the general federal weekly rule, hours cannot be averaged across the two weeks. One week can contain overtime even when the pay-period total is 80 hours.
Does working Saturday or Sunday automatically earn overtime?
The FLSA does not require overtime merely because work happens on a weekend or holiday. Weekly hours, applicable state rules and any contractual premium determine the treatment.
Is 12:00 AM noon or midnight?
In conventional 12-hour notation, 12:00 AM is midnight and 12:00 PM is noon. Use 00:00 for midnight and 12:00 for noon on a 24-hour clock to avoid confusion.
Sources
- 1Fact Sheet #23: Overtime Pay Requirements of the FLSA · U.S. Department of Labor · Accessed November 2026
- 2Fact Sheet #22: Hours Worked Under the Fair Labor Standards Act (FLSA) · U.S. Department of Labor · Accessed November 2026
- 329 CFR 785.48: Use of time clocks · Electronic Code of Federal Regulations · Accessed November 2026
- 4Overtime · California Department of Industrial Relations · Accessed November 2026
- 5Donohue v. AMN Services, LLC, S253677 · Supreme Court of California · Accessed November 2026
Results are estimates; consult a payroll professional about overtime eligibility, local rules or pay discrepancies.