How the time calculator works
A duration is an amount of time, such as 2 h 30 min. A clock time is a time of day, such as 2:30 PM. This calculator adds, subtracts, multiplies and divides durations, or applies a duration to a starting clock time.
- 1Add or subtract durations. In Add & subtract, enter hours and minutes in each row. Choose plus or minus for each additional duration. Turn on Seconds when your measurements include seconds.
- 2Find a clock time. In Clock time, enter a start time or tap Now. Choose addition or subtraction, then enter the duration. The result identifies any change of day.
- 3Multiply or divide a duration. In Multiply, enter a duration and a number, then choose multiplication or division. Use multiplication for repeated sessions and division for equal shares.
Duration results include hours and minutes, colon notation such as 4:15, decimal hours, total minutes and total seconds. Seconds appear when included. A list also shows its running total and working. In a duration result, 4:15 means four hours and fifteen minutes, not 4:15 AM or PM.
The time calculation formulas
NIST defines a minute as exactly 60 seconds, an hour as 60 minutes or 3,600 seconds, and a day as 24 hours or 86,400 seconds. Convert each duration to one unit before doing arithmetic.
Use zero for any unused component. This converts one duration to seconds.
For addition and subtraction, combine these totals using each row's chosen sign. A running total is the result after each successive row. For multiplication, multiply total seconds by the factor. For division, divide total seconds by the divisor, which must not be zero.
To convert back, take the whole hours from total seconds divided by 3,600. Divide the remaining seconds by 60 to get whole minutes; what remains is seconds. For a negative duration, convert its absolute value and place one minus sign before the whole result.
Worked example: adding hours and minutes
Add 2 h 45 min and 1 h 30 min. The first duration is 2 × 60 + 45 = 165 minutes; the second is 1 × 60 + 30 = 90 minutes. Their sum is 255 minutes. Dividing by 60 gives four whole hours with 15 minutes left.
Subtraction uses the same conversion. For 8 h − 45 min, calculate 480 − 45 = 435 minutes, or 7 h 15 min. On paper, this is equivalent to borrowing an hour: 7 h 60 min − 45 min.
Converting time to decimal hours
Equivalently, add hours + minutes ÷ 60 + seconds ÷ 3,600.
The University of Adelaide's conversion guide uses minutes divided by 60, with the whole hours unchanged. Thus, 7 h 45 min is 7 + 45 ÷ 60 = 7.75 hours. To reverse the conversion, multiply the fractional hour by 60: 0.75 × 60 = 45 minutes.
| Minutes | Decimal hours |
|---|---|
| 5 | 0.08 |
| 6 | 0.10 |
| 10 | 0.17 |
| 12 | 0.20 |
| 15 | 0.25 |
| 20 | 0.33 |
| 30 | 0.50 |
| 40 | 0.67 |
| 45 | 0.75 |
| 50 | 0.83 |
The colon and decimal point are not interchangeable: 7:30 is 7.5 hours, not 7.30 hours. Keep full precision while combining durations, then round the final decimal total. Adding rounded table entries can introduce small differences.
Adding or subtracting time on a clock
Convert the start time to minutes after midnight, then add or subtract the duration. The unwrapped total may fall outside the current day. Separate it into a whole-day offset and a clock time within that day.
There are 1,440 minutes in a fixed 24-hour day. Floor rounds down, including for negative totals.
For 10:30 PM + 7 h 45 min, the start is 1,350 minutes after midnight and the duration is 465 minutes. The sum is 1,815 minutes. Subtract one day, 1,440 minutes, to leave 375 minutes after midnight: 6:15 AM the next day.
The same clock result can use 12-hour or 24-hour notation: 6:15 AM is 06:15, and 5:30 PM is 17:30. A duration does not reset at midnight, so 27 hours remains 27 hours in a duration result.
Multiplying and dividing time
The factor and divisor are unitless numbers. Division by zero is undefined.
Five sessions of 7 h 45 min each give 465 × 5 = 2,325 minutes, or 38 h 45 min. Splitting 2 h 30 min into three equal parts gives 150 ÷ 3 = 50 minutes per part. Convert the entire duration before multiplying or dividing so remainders carry correctly.
Tips for entering time
- 1Choose the right kind of calculation. Use Clock time for an arrival or finishing time. Use Add & subtract for a total duration.
- 2Subtract breaks explicitly. An 8 h 30 min duration less a 30 min break gives 8 h. Breaks are not deducted automatically.
- 3Keep seconds until the final step. Include measured seconds before combining durations. Division can produce fractional seconds, so avoid rounding intermediate values.
Frequently asked questions
Is 1.5 hours the same as 1 hour 50 minutes?
No. Half an hour is 30 minutes, so 1.5 hours is 1 h 30 min. Decimal hours express a fraction of 60 minutes, not a fraction of 100 minutes.
How do I add minutes and seconds?
Add the seconds and carry each full 60 seconds into the minutes. For example, 32 min 15 s + 12 min 50 s gives 44 min 65 s, which becomes 45 min 5 s.
What time will it be in 8 hours?
In Clock time, tap Now and add 8 hours. For example, eight hours after 9:00 AM is 5:00 PM on the same day.
What happens when subtraction gives a negative result?
For durations, the minus sign indicates a shortfall: 1 h − 1 h 30 min = −30 min. For clock times, subtracting past midnight moves into the previous day. For example, 1:00 AM − 3 h is 10:00 PM the day before.
Is 12 AM midnight or noon?
In common digital-clock notation, 12 AM is midnight and 12 PM is noon. NIST cautions that these labels can be ambiguous at exactly twelve. Writing midnight or noon, or using 00:00 and 12:00, avoids that ambiguity.
Sources
- 1NIST Guide to the SI, Chapter 5: Units Outside the SI · National Institute of Standards and Technology · Accessed November 2026
- 2Work Pattern Guide - Minute to Decimal Conversion · University of Adelaide · Accessed November 2026
- 3Times of Day FAQs · National Institute of Standards and Technology · Accessed November 2026
- 4Daylight Saving Time Rules · National Institute of Standards and Technology · Accessed November 2026