How board feet work
A board foot is a volume equal to 144 cubic inches, the amount in a board 1 inch thick, 12 inches wide and 12 inches long. The unit is often abbreviated bd ft or BF. A thicker, narrower board can contain the same number of board feet as a thinner, wider board.
Enter thickness, width, length and the number of identical boards. The main result is the total before the extra allowance, with separate rows for board feet per board and the allowance-adjusted amount. Enter a price per board foot to get the material cost. Doubling one dimension or the quantity doubles the board feet when the other inputs stay unchanged.
Board foot formulas
This is the total before the extra allowance. Metric sizes are converted to inches and feet first.
The divisor 12 comes from converting length from feet to inches, then dividing by 144 cubic inches per board foot. If all three dimensions are in inches, divide boards × thickness × width × length by 144 instead. The unit selectors handle imperial and metric input conversions automatically.
Example: ten identical boards
The default inputs are 1 in thickness, 6 in width, 8 ft length and 10 boards. The extra allowance is 10%, and the example price is $6.00 per board foot.
Each board contains 1 × 6 × 8 ÷ 12 = 4.00 board feet. Multiplying by 10 gives 40.00 board feet before the extra allowance. The extra allowance is 40.00 × 10 ÷ 100 = 4.00 board feet, so the allowance-adjusted amount is 44.00 board feet.
The base material cost is 40.00 × $6.00 = $240.00. Including the extra allowance gives 44.00 × $6.00 = $264.00. The entered-size volume is 3.333 ft³, calculated from the same dimensions before the allowance.
Board feet for common board sizes
| Thickness × width | Length | Board feet each |
|---|---|---|
| 1 in × 6 inDefault size | 8 ft | 4.00 |
| 1 in × 8 in | 8 ft | 5.33 |
| 1 in × 12 in | 8 ft | 8.00 |
| 1.25 in × 6 in (5/4) | 8 ft | 5.00 |
| 2 in × 4 in | 8 ft | 5.33 |
| 2 in × 6 in | 8 ft | 8.00 |
The table uses the listed dimensions directly, not measured dressed sizes. The calculator keeps full precision internally and rounds board-foot results to two decimal places for display.
Which dimensions should you enter?
The 2025 American Softwood Lumber Standard bases board measure on nominal thickness and width. Its minimum dry dressed cross-section at manufacture for a nominal 2×4 is 1.5 in × 3.5 in. For an 8 ft board, the nominal dimensions give 5.33 board feet; using that dressed cross-section gives 3.50 board feet.
Use the seller's tally dimensions when you want to check a price quoted on that basis. Use measured dimensions when you want physical volume. The calculator does not infer actual sizes from trade names or apply commercial tally-rounding rules, so the entered-size volume row always has the same dimension basis as your inputs.
Hardwood thickness labels use quarters of an inch: 4/4 means 1 in, 5/4 means 1.25 in, 6/4 means 1.5 in and 8/4 means 2 in. These labels refer to rough stock; planed boards can be thinner.
Plan your lumber purchase
- 1Work from a cut list. Write down the finished parts you need, then choose stock widths and lengths that can yield them. Equal board-foot volumes do not guarantee that the required pieces will fit.
- 2Allow for trimming and milling. Choose an extra allowance from the cut list and board quality. Include saw cuts, end trimming and material removed during planing; a fixed allowance cannot account for where a defect falls.
- 3Check the quote's unit. Confirm the quote is per board foot, not per piece or linear foot. If it is per 1,000 board feet, divide the quoted amount by 1,000 before entering it.
- 4Check stock before rounding. The allowance-adjusted result may be a fraction of a board. Check available lengths and widths, then round your order to purchasable pieces; the calculator does not optimize a cutting layout.
Board foot questions
Are board feet the same as square feet or linear feet?
Board feet measure volume, square feet measure area, and linear feet measure length. For lumber exactly 1 inch thick, the square-foot and board-foot totals are numerically equal, but that relationship changes at other thicknesses.
How do I calculate several different board sizes?
Calculate each size as a separate batch, then add the board-foot totals. If the batches have different unit prices, calculate their costs separately and add those costs.
Can I use metric measurements?
Yes. Select Metric to use millimeters for thickness and width and meters for length, or change an individual field's unit. The board-foot result still uses the same volume definition.
Is adding 10% extra the same as losing 10% of the wood I buy?
No. The extra allowance is a percentage added to the starting volume. If 10% of your purchased wood will be unusable, you need 40.00 ÷ 0.90 = 44.44 board feet to obtain 40.00 usable board feet.
Does wood species change board footage?
Species is not part of this volume formula. Use the unit price for the species and grade you plan to buy when comparing costs.
Can I calculate board feet from a log's diameter?
No. Logs need special log rules, such as Doyle or the International rule, to estimate how much sawn lumber they can yield. Entering a log's diameter as both width and thickness does not turn this rectangular-board formula into a log scale.
Sources
- 1Woodworking: How to buy lumber · University of California Agricultural Extension Service · Accessed November 2026
- 2PS 20-25: American Softwood Lumber Standard · National Institute of Standards and Technology · Accessed November 2026
- 3Grading sawn lumber: measurement · American Hardwood Export Council · Accessed November 2026
- 4SI units: length · National Institute of Standards and Technology · Accessed November 2026
- 5How to measure trees and logs · University of Missouri Extension · Accessed November 2026
Volume and cost are estimates; confirm dimensions, tally rules and pricing with your lumber supplier.