How the calculator works
Enter mass and speed to find translational kinetic energy, the energy associated with an object's motion from place to place. For an extended object, use its total mass and the speed of its center of mass. The result does not add energy from spinning or internal motion.
Inputs and result
- Mass starts at 1,000 kilograms (kg). You can enter grams (g), kilograms (kg), metric tonnes (t) or pounds (lb).
- Speed starts at 20 meters per second (m/s). You can enter meters per second (m/s), kilometers per hour (km/h) or miles per hour (mph).
- The result is labeled Kinetic energy and defaults to kilojoules (kJ). Other available result units are joules (J), megajoules (MJ), kilowatt-hours (kWh) and kilocalories (kcal).
Both inputs accept zero and positive values. Zero mass or zero speed gives zero in this formula; negative inputs are not accepted. With the starting inputs, the result is 200 kJ.
The kinetic energy formula
This is the classical formula for translational kinetic energy. Mass in kilograms and speed in meters per second give energy in joules.
Square the speed, multiply by mass, then multiply by one-half. For the default inputs, 20 squared is 400, so the calculation is 0.5 × 1,000 × 400 = 200,000 J. The units work out because one joule equals one kilogram meter squared per second squared.
The calculator converts your inputs to kilograms and meters per second before applying the formula. You do not need to convert pounds or mph yourself. It then expresses the calculated energy in the selected result unit.
Worked example: 1,000 kg at 20 m/s
Leave Mass at 1,000 kg and Speed at 20 m/s. The formula gives 200,000 J; dividing by 1,000 converts this to the displayed result of 200 kJ. To enter the same motion using a different speed unit, select km/h and enter 72. The result stays at 200 kJ because 72 km/h and 20 m/s are the same speed.
How speed and mass change the result
| Speed (m/s) | Speed (km/h) | Kinetic energy (kJ) |
|---|---|---|
| 10 | 36 | 50 |
| 20Default | 72 | 200 |
| 30 | 108 | 450 |
| 40 | 144 | 800 |
At a fixed mass, doubling speed multiplies kinetic energy by four. Increasing speed from 20 to 30 m/s multiplies it by 1.5 squared, or 2.25, so energy rises from 200 to 450 kJ. Mass has a linear effect: at 20 m/s, doubling mass from 1,000 to 2,000 kg doubles energy from 200 to 400 kJ.
Choosing the right units
Match the selected unit to the number you enter. The mass option t means a metric tonne, equal to 1,000 kg, not a US short ton. For speed, 20 m/s is 72 km/h or about 44.74 mph. Entering 20 with mph selected describes a different motion from entering 20 with m/s selected.
One kilojoule is 1,000 J, one megajoule is 1,000,000 J, and one kilowatt-hour is 3.6 MJ. The default result of 200 kJ is therefore 0.2 MJ or about 0.0556 kWh. Changing the result unit changes how the energy is written, not the energy itself.
Tips for useful results
- 1Include the whole moving mass. For a loaded cart, use the mass of the cart and its load together if both move at the same speed. Leaving out the load gives the kinetic energy of only the mass you entered.
- 2Compare one input at a time. Hold mass constant when testing the effect of speed. Hold speed constant when comparing different masses. This makes the linear mass relationship and squared speed relationship easier to check.
- 3Keep precision until the final result. Enter your measured values without unnecessary rounding. Round the final energy to a precision that your mass and speed measurements can support.
When this formula applies
Frequently asked questions
Can kinetic energy be negative?
No. In this formula, nonnegative mass is multiplied by speed squared and one-half, so the result cannot be negative. An object can lose kinetic energy, which makes its change in kinetic energy negative, but its kinetic energy itself remains nonnegative.
Can I use average speed to calculate kinetic energy?
Use the speed at the moment whose kinetic energy you want. Entering a journey's average speed gives the energy associated with that speed, but generally does not give the average kinetic energy over the journey. Squaring an average speed is not the same as averaging the squared speeds.
Why does the reference frame affect kinetic energy?
Speed is measured relative to a chosen reference frame, so kinetic energy depends on that choice too. A passenger seated in a moving train has zero speed relative to the train but a nonzero speed relative to the track. Use speeds measured in the same reference frame when comparing results.
Does the result give stopping distance or impact force?
No. The result is energy, not force or distance. Bringing the default 1,000 kg object from 20 m/s to rest changes its translational kinetic energy by −200 kJ, equal to the net work done on that motion. Finding stopping distance or force requires more information about how the object slows down.
Sources
- 17.2 Kinetic Energy · OpenStax, Rice University · Accessed November 2026
- 27.2 Kinetic Energy and the Work-Energy Theorem · OpenStax, Rice University · Accessed November 2026
- 3NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically · National Institute of Standards and Technology · Accessed November 2026
- 45.9 Relativistic Energy · OpenStax, Rice University · Accessed November 2026
- 57.3 Work-Energy Theorem · OpenStax, Rice University · Accessed November 2026