Enter launch speed, launch angle and launch height to find the projectile's horizontal range: the distance from the launch position to where it reaches the landing plane. Range is not the length of the curved flight path. The calculator also gives time in the air and maximum height, with a chart showing height along the path.
Range is the main result, rounded to one decimal place, with meters, feet, yards or kilometers available. Time in the air is shown in seconds; the default result reads 2.884 sec. Maximum height is rounded to two decimal places and can be shown in meters or feet. It includes the launch height, so it is measured above the landing plane, not above the release point.
The calculator converts input measurements to meters and seconds before applying the equations. First, it splits launch speed into horizontal and vertical components. These components are used internally and are not separate result rows.
The launch angle is measured in degrees above the horizontal.
The flight-time equation comes from setting vertical position equal to zero and choosing the larger root of the resulting quadratic equation. Multiplying this time by horizontal speed gives range. Maximum height occurs when the upward vertical velocity has fallen to zero.
Leave Launch height at 0 m and gravity at its default, displayed as 9.807 m/s². At 45°, both launch-speed components are about 14.14 m/s. Using the unrounded components and the stored gravity value of 9.80665 m/s² gives the displayed results: 2.884 sec in the air, 40.8 m range and 10.20 m maximum height.
For an arithmetic check, flight time is 20 × √2 ÷ 9.80665 = 2.884 sec after rounding. Range is 400 ÷ 9.80665 = 40.8 m, and maximum height is 200 ÷ (2 × 9.80665) = 10.20 m. Keep full precision during the calculation and round only the final results.
Now change only Launch height to 5 m. Range becomes 45.3 m, flight time becomes 3.203 sec and maximum height becomes 15.20 m. The higher release point gives the projectile more time to reach the landing plane.
| Launch angle | Range (m) | Flight time (sec) | Maximum height (m) |
|---|---|---|---|
| 0° | 0.0 | 0.000 | 0.00 |
| 30° | 35.3 | 2.039 | 5.10 |
| 45°Default | 40.8 | 2.884 | 10.20 |
| 60° | 35.3 | 3.532 | 15.30 |
| 90° | 0.0 | 4.079 | 20.39 |
This shorter range formula applies only when launch and landing heights are equal, which means Launch height is zero here.
At equal launch and landing heights, 45° gives the greatest range for a fixed, nonzero launch speed. The 30° and 60° rows have equal ranges but different flight times and maximum heights. For a raised launch, use the full flight-time calculation instead of the shorter range formula.
The Height along the path line chart uses 21 equally spaced times from launch through landing. At each time, horizontal position is horizontal speed multiplied by elapsed time; height is launch height plus upward motion minus the gravitational drop. Horizontal labels use meters to one decimal place, and heights use meters to two decimals. The chart stays metric when result units change, and plotted heights below zero are clipped to zero.
Yes. Set Launch angle to 0° and enter a positive launch height; the projectile moves horizontally while falling to the landing plane. If launch height is also zero, the model gives zero flight time and zero range.
From a positive launch height, the object falls vertically, so range is zero and maximum height equals launch height. If both speed and launch height are zero, all three results are zero.
No. This version accepts angles from 0° to 90° and nonnegative launch heights, so it covers horizontal or upward launches landing at or below the release level. It has no separate target-height input.
No, it is measured above the landing plane and includes the entered launch height. Subtract launch height from maximum height to find how far the projectile rises after release.
Mass does not appear in these ideal-flight equations when gravity is the only force after launch. Real objects can follow different paths because aerodynamic forces depend on properties this calculator does not accept.
This version takes launch speed, angle, height and gravity as inputs and calculates the resulting motion. It does not solve backward from a target range to an unknown launch speed or angle.
The chart connects a limited set of sampled points, so the exact peak can fall between them. Maximum height is calculated directly from the peak-height formula, independently of those chart samples.
Landing occurs at zero height. Range and maximum height are calculated in meters before any selected output-unit conversion.